Phonetics Boat Remote - Manual (Page 21)

21
Chapter 2: Installation
Temperature Sensors
Your Boat Remote comes with a temperature sensor connected to
the TEMP1 input. This can be used to monitor the temperature
where the Boat Remote is installed. Up to two additional sensors
may be connected to the Boat Remote on the terminals labeled
TEMP2 and TEMP3. The temperature inputs on the Boat Remote
are compatible with industry standard 10K thermistors and are
available in a wide range of application specific models. These
include sensors for monitoring water, freezers, pipes and ducts.
*Contact Kele and Associates at (901) 382-4300 for temperature
sensors and specify 10K Type 3 sensors.
Fig. 2.4 Connecting Temperature Sensors