Panasonic CF-T1 - Manual (Page 13)

13
Touchscreen
<Only for models with touchscreen>
●
Use the stylus included with the computer. Do not use an implement other than the
stylus that comes with the computer.
●
Do not place any object on the surface or press down forcefully with sharp-pointed
objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pen).
●
Do not apply pressure within 5 mm of the perimeter of the display panel. The cursor
may move to the edge of the display.
●
Do not operate the computer when such things as dust are on the screen. Do not allow
contact with substances that could dirty the touchscreen, such as oil. The cursor may
not work properly in such cases.
●
When the touchscreen becomes dirty:
Wipe lightly to remove dirt by using a dry soft cloth included with the computer.
Do not use benzene or thinner, or rubbing alcohol.
For more information, refer to “Suggestions About Cleaning the LCD Surface” that
comes with the soft cloth.)
●
Clean the stylus tip and screen prior to operation. Foreign particles can scratch the
screen and impede the operation of the stylus.
●
Use the accessory stylus only for the computer screen. Using it for any other purpose
may damage the stylus and scratch the screen.
●
Do not use pencils, implements with sharp tips or hard objects for screen operations.
The screen may be damaged as a result.
●
Since the stylus is retractable tip, be sure to use the stylus only after the stylus tip is
ready for use (i.e., clicked open). Otherwise, scratches may result on the screen.
Handling the Touchscreen
Handling the Stylus