Panasonic CF-T1 - Manual (Page 17)

17
Standby/Hibernation Functions
■
In standby or hibernation mode
●
Do not insert or remove peripherals; abnormal operation may result.
●
In standby mode, power is consumed. If PC Cards are inserted, more of that power
is consumed. When all power has been consumed, all data saved at standby is lost
since it is retained in memory. We therefore recommend plugging in the AC adaptor
when using the standby function.
Using the Power Switch
■
Setting
Windows 2000
1
Select [Start] - [Settings] - [Control Panel] - [Power Options] -
[Advanced].
2
Select [Standby] or [Hibernate] for [When I press the power
button on my computer] and then select [OK].
Windows XP
1
Select [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
2
Select [Stand by] or [Hibernate] for [When I press the power
button on my computer], then select [OK].
■
Shutting down
Slide the power switch (A) ; at the “Beep*” sound, release your
finger.
The computer will enter either the standby or hibernation mode, depending on the
setting.
CAUTION
●
After releasing your finger from the power switch, do not touch the power switch until
the power indicator goes off or blinks.
●
At the “beep*” sound, release your finger from the power switch. If you continue to
slide the switch and hold it for more than four seconds, the computer will emit a
second “beep*” then power off. Data not previously saved will be lost.
Windows 2000
Even when [When I press the power button on my computer] is set to [Power Off]
with [Start] - [Settings] - [Control Panel] - [Power Options] - [Advanced], if you slide
the power switch for more than four seconds and do not release it, a second “beep*”
will sound and the power will be turned off forcibly. Data not previously saved will be
lost.
Windows XP
Even when [When I press the power button on my computer] is set to [Shut down]
with [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced], if you slide the power switch for more than four seconds and do not
release it, a second “beep*” will sound and the power will be turned off forcibly.
Data not previously saved will be lost.
*
When the speaker function is disabled, e.g., by the key combination
Fn + F4 , there will
be no beep sound.