Panasonic CF-T1 - Manual (Page 32)

32
PC Cards
Your computer has one PC Card slot. This slot conforms to the PC Card Standard;
therefore, communications and SCSI devices may be utilized. The slot allows you to use
one Type I or Type II card.
CAUTION
●
Check the PC Cards’ specifications. Be sure the total operating current does not
exceed the specified limit. Damage may result otherwise.
Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA
●
ZV card, SRAM card, FLASH ROM card (except for an ATA interface) and card
requiring 12V are not supported.
●
With the repeated insertion/removal of a PC Card, the computer may no longer
recognize the PC Card (depending on the type of card).
In such cases, restart the computer.
●
If the computer freezes after resuming from the standby or hibernation mode,
restart the computer.
Inserting a PC Card
Simply slide the PC Card in with label-side up (A) until it snaps
into place.
Refer to the operation manual of each card on how to insert the card.
After the card is inserted, bend the eject button (B).
CAUTION
●
When using a PC Card to connect a peripheral device (SCSI, etc.):
1
Connect the peripheral device to the card.
2
Turn the device ON.
3
Slide the card in until it snaps into place.
●
When inserting a card, do not force the card in if difficulty is encountered.
Depending on the shape of the card, a segment may remain protruding from the slot
after insertion. Do not try to force the card all the way in. You may damage the slot,
making it impossible to remove the card.
Inserting/Removing the PC Card