Panasonic CF-T1 - Manual (Page 61)

61
Technical Information
If the power saving function (standby or hibernation mode) activates while communications
software is being used, the network connection may be interrupted, or performance may
be adversely affected. If this happens, restart the computer.
Be sure to close the communications software before using the power saving function.
When using the computer in a network environment, we recommend that you set [System
standby] and [System hibernates] to [Never], using the following procedure:
Windows 2000
:
[Start] - [Settings] - [Control Panel] - [Power Options] - [Power Schemes]
Windows XP
:
[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]
The Windows files included in the Retail Version of the Windows CD-ROM for each OS are
contained in the following folders:
Windows 2000
c:\winnt\cdimage
Windows XP
c:\windows\docs, c:\windows\dotnetfx, c:\windows\i386, c:\windows\support, c:\windows\valueadd
Prior to usage, optimize the LAN card settings by following the procedure given below.
Failure to do so may result in an error message being displayed when performing a copy
operation via the LAN card with a computer on the network.
1
Select the LAN card you are using from [Network adapters] in
[Control Panel] - [System] - [Hardware] - [Device Manager].
2
Select [Advanced], select [Store And Forward] from [Property],
then set [Enable] for [Value] if it is set to [Disable].
(This item may be unavailable for some types of LAN cards.)
If you install the Recovery Console, you can use the command prompt to perform
operations such as CHKDSK in cases where, for example, Windows XP will not start. Use
the following procedure to install Recovery Console. This procedure allows you to select
Recovery Console as a startup option during startup.
1
Select [start] - [Run].
2
Input [c:\windows\i386\winnt32.exe /cmdcons], then select [OK].
Follow the on-screen instructions.
NOTE
●
For an overview of Recovery Console, refer to [Help and Support].
1
Select [start] - [Help and Support].
2
Enter “Recovery Console” under [Search], then select .
Network Connections and Communications Software
When using the Files on the Retail Version of the Windows CD-ROM
Precautions When Using a CardBus Type LAN Card
Windows 2000
Recovery Console
Windows XP