Panasonic CF-T1 - Manual (Page 58)

58
Setup Utility
NOTE
● When the Setup Utility is started up with the User Password:
• [Clear registered SD card], [Set Supervisor Password] and [Hard Disk Lock] will
not be displayed.
• The User Password can be changed only when [User Password Protection] has
been set to [No Protection]. The User Password cannot be deleted.
■
Parameters
( : Default)
*1
This is displayed only when an SD memory card has been registered. However, [SD
Startup] and [SD Setting Method] cannot be set if [Password on boot] is set to
[Disable].
*2
This can be set only if [SD Startup] has been set to [Enable].
*3
Setting impossible when the Supervisor Password is not set.
Security Menu
Password on boot:
SD Startup:
SD Setting Method:
Clear registered SD card:
Set Supervisor Password:
Display Boot Menu:
Hard Disk Lock:
User Password Protection:
Set User Password:
[Enable]
[Disable]
[Leave Set]
[Enter]
[Enter]
[Enable]
[Disable]
[No Protection]
[Enter]
Password on boot Disable
Enable
SD Startup
*1 Disable
Enable
SD Setting Method
*1*2 Leave Set
Set and Eject
Clear registered SD card
*1 To the sub-menu
Set Supervisor Password To the sub-menu
Display Boot Menu Disable
Enable
Hard Disk Lock
*3 Disable
Enable
User Password Protection No Protection
Protected
Set User Password
*3 To the sub-menu