Panasonic CF-T1 - Manual (Page 29)

29
Battery Power
When the charge provided by your battery pack is supplied for only a short period of time,
even after fully charging according to the instructions, it may be time to replace your
battery pack. The battery pack is a consumable item and therefore will require
replacement (CF-VZSU24).
CAUTION
●
Do not touch the terminals on the battery pack and the computer. The battery pack
may no longer function properly if the contacts are dirty or damaged.
●
The battery pack is not charged when the computer is first purchased. Be sure to
charge it before using it for the first time. When the AC adaptor is connected to the
computer, charging begins automatically.
●
Use only the specified battery pack (CF-VZSU24) with your computer.
●
In the standby mode, do not remove/change the battery pack. Removing the pack in
the standby mode will erase your data and may damage the computer.
1
Power off your computer. (
Ÿ
“Starting Up/Shutting Down”)
Do not shut down using the standby function.
2
Turn your computer over and remove the battery pack.
Remove the battery pack while sliding the latches (A) inward.
3
Insert the battery pack.
Make sure the battery pack is facing the correct direction, then slide it in the direc-
tion of the arrow, and then check to ensure that the battery pack is held firmly by the
latches (A) on the left and right sides.
CAUTION
●
Be sure the battery pack is properly connected to the connector.
Replacing the Battery Pack