Panasonic CF-T1 - Manual (Page 59)

59
Setup Utility
The default order is as follows:
[Floppy Drive]
*1 Î [Hard Disk Drive] Î [USB CD Drive] *1 Î [LAN] *2
.
To move a device up by one in the order, select the device with
Ï
and
Ð
, and then press
F6.
To move a device down by one in the order, select the device with
Ï
and
Ð
, and then
press
F5.
*1
This is displayed even if a floppy disk drive or CD drive is not connected.
The following drive can be used for startup (recommended).
• Panasonic USB floppy disk drive: (optional:CF-VFDU03)
For U.S.A. and Canada For U.S.A. and Canada For U.S.A. and Canada For U.S.A. and Canada
• Panasonic CD drive : (optional:CF-VDRRT1<USB>)
*2
This is not displayed when [LAN] is set to [Disable] or [Boot up from LAN] is set to
[Disable] on [Advanced] menu.
NOTE
Boot Menu
● The device for starting up the Operating System can also be selected during com-
puter start-up. After the computer is turned on and
ESC is pressed at [Panasonic]
screen, [Boot Menu] (the device selection display) will appear. When the setting of
[Boot] menu is changed, the selection screen display will also change. [Boot Menu]
is displayed only when [Display Boot Menu] in [Security] menu is set to [Enable].
Boot Menu
Floppy Drive *1
Hard Disk Drive
USB CD Drive
*1
LAN
*2