Panasonic CF-T1 - Manual (Page 33)

33
PC Cards
Removing a PC Card
CAUTION
●
Do not remove a PC Card while your computer is in the standby or hibernation
mode.
●
Note that the operation of removing the PC Card may not be complete, depending
on the status of the PC Card or device connected to the PC Card, such as when a
SCSI card is used to connect an external hard disk to the computer. In such cases,
turn off the power from [Start]* menu, then remove the card.
*
Windows XP
: [start]
1
Windows 2000
Select on the taskbar, select the PC Card, then select [Stop].
Follow the on-screen instructions.
(When the PC Card has been removed after the computer is turned off, this step is
not necessary.)
Windows XP
Select on the taskbar, select the PC Card, then select [Stop].
Follow the on-screen instructions.
(When the PC Card has been removed after the computer is turned off, this step is
not necessary.)
2
Raise the bent part of the eject button (B).
3
Press the button and slide the PC Card out.