Panasonic CF-T1 - Manual (Page 54)

54
Setup Utility
1
Slide the power switch, and immediately hold down
F2.
2
Release the key when the Setup Utility starts up.
If [Enter Password] is displayed, enter your password.
When a User Password is entered, some contents cannot be changed (
Ÿ page 19 ).
NOTE
● If you fail to press F2 at the right moment, the Setup Utility will not start up. In this
case, power off the computer and try again.
● To close the Setup Utility, press Esc, select the exiting method in [Exit] menu, then
press
Enter.
Key Operations
F1
: To display the corresponding “help” file.
Esc
: To display [Exit] menu.
П Р
: To move among the items.
Н О
: To move among the menus.
F5 F6
: To move among the values.
Enter
: To display sub-menu of each item selected by П Р.
F9
: To set default settings (except the password).
(When starting up the Setup Utility with the User Password, this key is not
available.)
F10
: To save the settings and exit.
NOTE
● When setting date and time, Tab can be used to move the cursor.
Running the Setup Utility