Panasonic CF-T1 - Manual (Page 35)

35
SD Memory Card/MultiMedia Card
■
Protecting important data
●
Set the write-protect switch (A) to the LOCK position. Unlock the switch when you
want to record (checkout) or edit data.
●
Use an oil-base felt-tip pen to write in the memo area (B) on the card. Do not use a
pencil or ball-point pen. Doing so can damage the card body or destroy data stored
in the card.
●
Do not remove the card or turn off the device while data is being read from or written
to the card. Doing so can destroy data stored in the card. (Note that Panasonic
assumes absolutely no liability for any loss of data recorded by the user, or any
other damages, direct or indirect.)
●
We recommend backing up important data to another storage medium.
■
Data transfer rate
The transfer rate using the SD memory card slot on this computer is 2MB per second.
The transfer rate is 2MB per second even if you use an SD memory card that supports
high-speed transfer rates.
Windows 2000
■
Formats for SD memory cards
●
This computer does not support formats for NTFS file systems. Do not format the
SD memory card using the NTFS file format.
MultiMedia Card (MMC)
The MultiMedia Card can be used in ways such as the following.
●
Use to exchange data with devices equipped with a MultiMedia Card slot.
●
Use as a memory card. (The MultiMedia Card can be used as a drive for storing files,
etc.)
This computer may not support some cards.
A
B
Back Side