Panasonic CF-T1 - Manual (Page 52)

52
LAN
When using the computer as a network computer, some additional settings may have to be
made depending on the usage conditions. We recommend asking your system administra-
tor or the person in charge of the network.
1
Power off your computer.
(
Ÿ “Starting Up/Shutting Down”)
Do not shut down using the standby or hibernation function.
2
Connect the cable.
Connect the LAN port (A) and the network system (server, HUB, etc.) using a LAN
cable.
CAUTION
●
Do not use the standby or hibernation functions during communications (except
when the Wake up from LAN function is in use), as this may cause an error in data
transmission or reception. The timeout function may engage even during data
transmissions, causing the computer to automatically go into standby or hibernation
mode. When not using the Wake up from LAN function, we recommend disabling
the timeout function using the following procedure:
Windows 2000
[Start] - [Settings] - [Control Panel] - [Power Options] - [Power Schemes]
Windows XP
[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power
Schemes]
NOTE
●
If you are unable to connect to the network (when the indicator of your HUB unit
does not light):
1 Windows 2000
Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] -
[Hardware].
Windows XP
Select [Device Manager] in [start] - [Control Panel] - [Performance and Mainte-
nance] - [System] - [Hardware].
2
Select the network adaptor you are using from [Network adapters].
3
Select [Advanced].
4
Confirm the settings of each item.
Connecting LAN