Pioneer VSA-AX10 - Manual (Page 15)

QUICK ST
AR
T GUIDE
15
En
Quick Start Guide Part2
10
Auto Surround Setup
Please Wait
Caution!!
Test tone is
output loudly.
[ Cancel ]
Auto Surround Setup
• Connect microphone
• Please be quiet
• Move obstacles away
• If you have a subwoofer
turn power on and
turn volume up
[ Start ]
[Cancel]
Auto Surround Setup
Now Analyzing
•••
Environment Check
Ambient Noise [OK]
Microphone [OK]
Speaker Level [ OK ]
[ Cancel ]
Check!!
Front [ YES ]
Center [ YES ]
Surround [ YES ]
SurrBack [ YES X 2]
Subwoofer [ YES ]
[ OK,Go Next ]
[Retry]
[ERR Fix SP.]
[Return to Menu]
\
\
5 Press AMP then press the SUB button
on the remote control.
6 Press the SYSTEM SETUP button and
use the on-screen display (OSD) that
appears on your TV.
7 The arrow should be pointing at AUTO
SURROUND SETUP, press ENTER.
8 NORMAL SURROUND should be
selected. (Use the
2 3 buttons to
select it if it isn't.) Use the
5∞ buttons
to select GO NEXT and press ENTER.
For Bi-amp settings choose FRONT BI-AMP 5.1 and
follow the directions from step 3 on page 39.
RETURN brings you back to the system setup menu.
9 Some auto setup instructions will be
listed, make sure to follow them.
Make sure you have: hooked up the microphone and
moved obstacles to the speakers out of the way. If you
have a subwoofer make sure it is turned on and has the
volume turned up.
WARNING: The test tones are very loud!! Make sure
there are no infants or small children in the room and
that no one who will be scared, upset or injured by loud
noise is present. You yourself may want to wear ear-
plugs. It is possible to lower the volume of test tones,
but this could result in incorrect speaker settings.
10 If you have followed all setup
instructions and warnings above make
sure that the arrow is pointed to
START and press ENTER. Be prepared
for loud test tones.
Try to be as quiet as possible after hitting ENTER. The
test tones may take up to 30 seconds.
The volume automatically increases to 0 dB, then the
system will output some test tones and establish
ambient noise levels, the microphone status, and what
speakers you hooked up.
\
5
5
6
7
STATUS SPEAKER
A/B
LOUDNESS
INPUT
ATT.
Amplifier MAIN SUB
SIGNAL
SELECT
TAPE 2
MONITOR
SYSTEM
SETUP
DISPLAY
DIMMER
VIDEO
SELECT
EFFECT/
CH SEL.
BASS/
ATREBLE
TONE
AMP
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
REMOTE
SETUP
CD-R/
TAPE1
CD
TUNER
VIDEO
SAT
TV
CONTROL
System Setup
[ Auto Surround Setup ]
[1. Input Assign]
[2. Surround Setup]
[3. Expert Setup]
[4. THX Audio Setup]
[Exit]
8
Auto Surround Setup
Speaker System Select
[ Normal Surround ]
[Go Next]
[Return]