Surround setup, Setting up for surround sound – Pioneer VSA-AX10 User Manual

Page 39

Advertising
background image

SURROUND SETUP

39

En

Setting Up for Surround Sound

2.1. Speaker Systems

Manual Free

” Normal Surround ”

Front

[LARGE]

Center

[LARGE]

Surround

[LARGE]

SurrBack

[LARGE

X

2 ]

Subwoofer

[

YES

]

( NEXT)

3,4

2.1. Speaker Systems
Manual Free

Speaker System Select

[

Normal Surround

]

( Next)

2

2.1. Speaker Systems

[

Manual Free

]

[Manual THX]
(all small)
[Auto]

[Return]

2.1. Speaker Systems

Manual Free

” Normal Surround ”

Front

[

LARGE

]

Center

[LARGE]

Surround

[LARGE]

SurrBack

[LARGE

X

2]

Subwoofer

[ YES

]

( NEXT)

7

1

5˜∞ buttons

ENTER

STANDBY/O

1 SPEAKER SYSTEMS should be

selected. If it isn’t use the

5∞ buttons

to select it. Press the ENTER button.

The setup possibilities appear on your TV.

2 Use the

5∞ buttons to select the

speaker system setting.

Choose from:
MANUAL FREE: Sets all the speakers
MANUAL THX: All speakers are set to SMALL. You can
select the number of surround back speakers.
AUTO: All speakers are set automatically. (The micro-
phone must be hooked up to the front panel in order to
use this setting.)

For MANUAL FREE, select it and press ENTER. Then go
to step 3.
For MANUAL THX, select it and press ENTER. Then go
to step 3.
For AUTO, select it and press ENTER. Be prepared for
loud test tones and make sure the room is free of ambient
noise (see memo page 16). When you see OK on the OSD
the setup is finished. Go to step 9.

3 Use the

2 3 buttons to select either

NORMAL SURROUND or FRONT BI-
AMP (5.1).

NORMAL SURROUND: For normal home theater use
FRONT BI-AMP (5.1): Settings for bi-amp (see p.67).

4 Use the

button to go to the next

screen.

5 With the

5∞ buttons choose the set of

speakers that you want to set.

If you selected MANUAL THX in step 2 set all speakers,
except for surround back, to SMALL.

6 Use the

2 3 buttons to choose the size

and number for each set of speakers as
well as LARGE, SMALL, YES, NO or
PLUS.

7 Repeat steps 5 & 6 for all speakers

channels.

2.Surround Setup

[ Check ]

[

1.Speaker Systems

]

[ 2.Channel Delay ]
[ 3.Channel Level ]
[ 4.Acoustic Cal EQ ]

[Return]

5

Advertising