Pioneer VSA-AX10 - Manual (Page 64)

Remote Control of Other Components
64
En
Using the Remote Control with Other Components
DVD and TV operations
• The following operations are available from the amplifier's remote control after you program
your DVD or TV into it, but some operations may need to be learned separately by the
amplifier (see “Setting Up the Remote Control to Control Other Components,“ p.60-63).
• Press the DVD or TV CONTROL button to set the remote to the DVD or Digital TV mode.
• For more information on individual commands consult the manual that came with the component.
• The "Standard" screen will appear when presetting the TV/SAT (or any other) function button. Other
standard controls for the TV can be accessed down the right side of the remote control (see “Remote
Control,” p.29, #8). When presetting the TV CONTROL function button the "Digital" TV screen will
appear.
DVD
1
Press to switch the DVD player on or off (not
possible with all models, especially those without
a standby mode).
2 4˜¢
4 : Press to return to the beginning of the
current chapter (track). Press repeatedly to return
to the beginning of previous chapters (tracks).
¢ : Press to advance to the beginning of the
next chapter (track). Press repeatedly to advance
to the beginning of following chapters (tracks).
3 1˜¡
1 : Hold down for fast reverse playback.
¡ : Hold down for fast forward playback.
4 SEARCH MODE
Press to perform a title, chapter/track or elapsed
time search.
5 7
Press to stop playback.
6 3
Press to start playback.
7 8
Press to pause playback.
8 Number buttons
Use to select chapters (tracks).
9 C
Use to clear chapters (tracks) or programmed
selections.
0 +10
Use when selecting chapter (track) numbers
higher than 10. Press +10 for every set of ten and
then the ending digit. For example: +10,+10,
1=21.
- RETURN
Use to go back a screen or menu.
= TOP MENU
Press to call up the menu programed on the DVD.
memo
DVD
1 2
4
7 8 9
5 6
3
SEARCH
MODE
TOP
MENU
RE-
TURN
MENU 0 C 10 1
~ = - 0
2
3
4
5
6 7
9
8
ENTER
STANDBY/ON
VCR2
VCR3
TV
!
Digital TV screen
TV
1 2
4
7 8 9
5 6
3 GREEN
YELLOW
CHANNEL
RETURN
ANT
BLUE RED
MENU
ENTER 0
MUTE
DTV
MENU
L1
DTV
ON/OFF
9
1
2
3
5
4
6
7
8
0
Digital TV screen
1 DTV ON/OFF
Press to switch the DTV mode on or off.
2 MUTE
Press to mute or restore the volume.
3 DTV MENU
Press to select the DTV menu.
4 ANT
Use to select the type of antenna you have hooked
up to your TV.
5 MENU
Use to select different menus on a DTV screen.
6 BLUE/GREEN/RED/YELLOW
Use to make selections from the DTV menu.
7 Number buttons
Use to select a specific TV channel.
8 ENTER
Use to select the channel specified with the
number buttons (not all models require this step).
9 CHANNEL RETURN
Use to return to the previous channel.
0 L1
Freely assignable key where you can enter any
command you like.
- 5˜∞˜2˜3˜ENTER
5˜∞˜2˜3 : Use to select or adjust items on the
menu screen.
ENTER : Use to activate the selected function.
~ MENU
Use to display or close the title menu screen.
! 5˜∞˜2˜3˜ENTER
5˜∞˜2˜3 : Use to navigate through options on
menu screens and to change settings.
ENTER : Use to implement settings selected with
the cursor buttons or to set items highlighted in a
menu.
DVD
ENTER
STANDBY/ON
VCR2
VCR3
TV
-