Pioneer VSA-AX10 - Manual (Page 43)

SURROUND SETUP
43
En
Setting Up for Surround Sound
Acoustic Calibration EQ
This setting is a kind of room equalizer for your speakers, excluding the subwoofer. You can select the
frequency balance between your speakers that suits your personal tastes. This feature also allows you to
increase the amount of a certain frequency in the soundtrack, which will have the effect of hearing more (or
less) bass, mid-range or treble. Use this feature by following the on-screen displays (OSD) on your TV and using
the arrow and ENTER buttons. If starting fresh, complete steps 1-4 in “Setting Up for Surround Sound“ (p.37)
first.
1
2.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Delay ]
[ 3.Channel Level]
[
4.Acoustic Cal EQ ]
[Return]
4 In MANUAL mode, when done select
RETURN with the
5∞
buttons and
press ENTER.
In SEMI AUTO mode, anytime you
want to exit the process press ENTER.
The display on the amplifier will say RESUME and the
MASTER VOLUME will return to its original position.
Next, proceed to Acoustic Calibration EQ.
+ 1. 5dB
+ 1. 5dB
+ 2. 0dB
- 3. 5dB
- 1. 5dB
+ 3. 0dB
+ 2. 0dB
+ 10. 0dB
2.3. Channel Level
Manual
Front [ ]
Center [ ]
Front [ ]
Surround [ ]
SurrBack [ ]
SurrBack [ ]
Surround [ ]
Subwoofer [ ]
[ Return ]
L
R
R
R
L
L
4
2.3. Channel Level
[Manual]
[
Semi Auto ]
[Auto]
Normal Surround
[Return]
Your Speaker Systems
” Normal Surround ”
+ 1. 5dB
+ 1. 5dB
+ 2. 0dB
- 3. 5dB
- 1. 5dB
+ 3. 0dB
+ 2. 0dB
+ 10. 0dB
2.3. Channel Level
Semi Auto
Front [ ]
Center [ ]
Front [ ]
Surround [ ]
SurrBack [ ]
SurrBack [ ]
Surround [ ]
Subwoofer [ ]
Return = Push Enter
L
R
R
R
L
L
1 ACOUSTIC CAL EQ should be selected.
If it isn’t use the
5∞ buttons to select
and press ENTER.
You should get the first Acoustic Calibration screen on
your TV.
memo You can change the channel level of each speaker at any time by using the EFFECT CH/SEL. and
+/
−
buttons on the AMP SUB screen on the remote control. You can set the levels for each three
groups of the listening modes (STANDARD/HOME THX, ADVANCED CINEMA/ADVANCED
CONCERT, STEREO) and MULTI CH IN mode but keep in mind that all your settings will be
cleared if you use the Surround Setup or Auto Surround Sound Setup to set the channel levels at a
later date.