Pioneer VSA-AX10 - Manual (Page 71)

Using Other Functions
EXPER
T
71
En
• You can also control PIONEER components (and those made by other manufacturers) by pointing the
amplifier's remote control directly at the respective component. This type of operation does not re-
quire control cords. All you have to do is recall the appropriate stored settings (see p.60-61).
• If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able
to use this unit's remote control.
• If you use this feature make sure an analog (audio and/or video) connection has been made between
the amplifier and the component(s).
The PIONEER SR System: Operating other PIONEER
components
Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the
amplifier's remote control at the remote sensor on the front panel of the amplifier. The amplifier then sends the
remote control signals to the other devices via the CONTROL OUT terminal.
Remote Control
Amplifier
To CONTROL IN
terminal of another
PIONEER component
bearing the
Î mark.
PIONEER
component bearing
the
Î mark.
memo
OUT IN
CONTROL
OUT
IN
CONTROL
+
VOL +
ENTER
FUNCTION
TV CONTROL
MUTING
MASTER VOLUME
SYSTEM OFF MULTI OPERATION STANDBY/ON
–
VOL –
CH –
CH +
FUNCTION
use lock
RECEIVER
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
REMOTE SETUP
CD-R/
TAPE1
CD
TUNER
VIDEO
SAT
TV CONTROL
LIGHT