Pioneer VSA-AX10 - Manual (Page 89)

Advanced Setup
EXPER
T
89
En
Surround Back Speaker Position
This setting has been specifically designed to set the distance between your surround back speakers, If you
don't have surround back speakers, or just have one, you won't be able to select this setting. The Advanced
Speaker Array (ASA) system was developed with the principles of THX Ultra2 technology in order to get
optimum sound from your surround back speakers. You choose whether your speakers are closer or further
apart than 4 feet (setting them together is best for ASA). For more information about ASA see page 94 and for
more information on speaker placement using the ASA system see p.96.
4.THX Audio Setup
[ 1.Ultra2 SW Setup ]
[
2.SurBack SP Position ]
[ 3.Re-Equalization ]
[Return]
4.2. SurBack SP Position
SB L - SB R
[ TOGETHER ]
[Return]
SB L SB R
< 1.2m
4.2. SurBack SP Position
SB L - SB R
[ APART ]
[Return]
SB L SB R
>= 1.2m
4.2. SurBack SP Position
SB L - SB R
[ APART ]
[ Return ]
SB L SB R
>= 1.2m
1
2
3
ENTER
STANDBY/ON
5˜∞˜2˜3˜ENTER buttons
Follow steps 1-4 on page 88, if necessary, to get to
the starting point mentioned here.
1 SURBACK SP POSITION should be
selected if it isn’t use the
5∞
buttons to select it. Press ENTER.
2 Use the
2 3 buttons to select either
APART or TOGETHER.
3 Use the
5∞ buttons to select
RETURN and press ENTER.
4 If you want to continue THX AUDIO
SETUP use the
5∞ buttons to select
the next setup and press ENTER.
Go on to the next page.
5 If you want to finish THX AUDIO
SETUP use the
5∞ buttons to select
RETURN and press ENTER. Then use
the
5∞ buttons to select EXIT and
press ENTER.