Using the headphones, Video select, Basic operation – Pioneer VSA-AX10 User Manual

Page 58: Headphone jack

Advertising
background image

Basic Operation

58

En

Video Select

This function allows you to listen to one sound source while you watch a different video source on your TV. The
sound source is set in the normal fashion as is explained on p.46-47. You then alter the video input with the
VIDEO SELECT button.

1 Use the VIDEO SELECT button on the

AMPLIFIER’S SUB screen or the front
panel to cycle through the different
possible video inputs.

The first press shows the video input you are currently
using. After that pressing VIDEO SELECT cycles though
the possibilities in the following order:

The OFF setting means you are listening without a
video signal. (Also, when you select CD-R/TAPE1/MD,
CD, TUNER, or PHONO functions the VIDEO SELECT
will be set to off.)

After choosing a video input the display on the amplifier
will show that input for about 5 seconds and then
revert to showing the listening mode the amplifier is in.

1

VIDEO SELECT

• The VIDEO SELECT remains set to the input you

chose until you change the audio input.

• If you change audio functions the amplifier will

reset itself to make the video and audio inputs
correspond.
Also, if you switch the power of the amplifier off
when you turn it back on the video and audio in-
puts will reset so that they correspond. The same
thing will happen if you select CD-R/TAPE1/MD,
CD, TUNER, or PHONO functions.

memo

Using the Headphones

The headphone feature is explained here.

1 Plug headphones into the headphone

jack on the front of the amplifier.

No sound will be audible from the speakers when
headphones are plugged in.

• All listening modes will be downmixed to 2 chan-

nels.

• If you’re listening to a 2 channel source there will

be no matrix decoding (i.e. you will not be able to
get surround sound decoding).

• If your U-shaped connectors (see p.32) aren’t in

place you won’t be able to use headphones.

memo

1

headphone jack

DVD/LD

TV

SAT

OFF

VIDEO

VCR 1/DVR

VCR 3

VCR 2

STATUS

SPEAKER

A/B

LOUDNESS

INPUT

ATT.

Amplifier

MAIN

SUB

SIGNAL

SELECT

TAPE 2

MONITOR

SYSTEM

SETUP

DISPLAY

DIMMER

VIDEO

SELECT

EFFECT/

CH SEL.

BASS/

TREBLE

TONE

1

Advertising