Pioneer VSA-AX10 - Manual (Page 82)

Advanced Setup
82
En
STATUS SPEAKER
A/B
LOUDNESS
INPUT
ATT.
Amplifier MAIN SUB
SIGNAL
SELECT
TAPE 2
MONITOR
SYSTEM
SETUP
DISPLAY
DIMMER
VIDEO
SELECT
EFFECT/
CH SEL.
BASS/
ATREBLE
TONE
AMP
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
REMOTE
SETUP
CD-R/
TAPE1
CD
TUNER
VIDEO
SAT
TV
CONTROL
Expert Setup
These settings are more advanced. Some could add depth or listenability to your sound (like the Dynamic Range
Control) and others are for your convenience (like the Function Rename). You can decide if you want to make
these settings or not. They are not crucial to good surround sound. You only need to make these settings once
(unless you change the placement of your current speaker system, add new speakers or components to your
system, etc.). These setup operations use your TV to display the settings and choices so be sure your TV and
amplifier are properly hooked up.
1 Turn on the amplifier and your TV,
press the AMP on the remote
control.
Make sure your TV is set to the amplifier.
2 Press the SUB button on the
amplifier screen.
3 Press the SYSTEM SETUP button.
The menu possibilities appear on your TV.
4 Select EXPERT SETUP with the
5∞
buttons. Press the ENTER button.
5 Follow the order below to make
advance settings. Use the
5∞
buttons to navigate through the
menus. When you have the setting
you want in particular menu, press
ENTER.
In each mode, the current settings are displayed
automatically.
OSD (SCREEN DISPLAY) ADJUSTMENT (p.83)
This feature allows you to adjust positioning of the
display to fit your TV better.
BASS PEAK LEVEL (p.84)
Dolby Digital, MPEG and DTS audio sources include
ultra-low bass tones. Set the bass peak level as
needed to prevent the ultra-low bass tones from
distorting the sound from the speakers.
DYNAMIC RANGE CONTROL (p.85)
This feature makes possible excellent surround sound
effects when listening to Dolby Digital sources at low
volumes.
MULTI CH IN SELECT (p.86)
This feature is for choosing an output method for
people who have connected their DVD player up with
multi channel analog inputs.
FUNCTION RENAME (p.87)
This feature allows you to change the names that
appear on your amplifier's display to suit your home
system in a customized way.
3
2
+
VOL +
ENTER
FUNCTION
TV
CONTROL
MUTING
MASTER VOLUME
SYSTEM
OFF
MULTI
OPERATION STANDBY/ON
–
VOL –
CH –
CH +
FUNCTION
use lock
AMP
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
REMOTE
SETUP
CD-R/
TAPE1
CD
TUNER
VIDEO
SAT
TV
CONTROL
MAIN SUB
(DVD-A
/SACD)
DIGITAL
NR
ACOUSTIC
CAL. MIDNIGHT
LISTENING MODE
LISTENING
CH SEL.
MULTI CH
IN THX STANDARD
SURROUND
ADVANCED
CONCERT
ADVANCED
CINEMA
STEREO
/DIRECT
Amplifier
LIGHT
1
3.Expert Setup
[ 1. OSD Adjustment ]
[2. Bass Peak Level]
[3. D-Range Control]
[4. Multi-Ch In Select]
[5. Function Rename]
g]
[Return]
System Setup
[Auto Surround Setup]
[1. Input Assign ]
[2. Surround Setup ]
[
3. Expert Setup ]
[4. THX Audio Setup ]
[Exit]
4
5