Pioneer VSA-AX10 - Manual (Page 34)

34
En
Displays & Controls
Front Panel
All the controls on the front panel are explained and/or referenced here. To open the front panel push
gently on the lower third of the panel.
1 INPUT SELECTOR dial
Turn to select a source component. The input
indicators show the current component.
2 STANDBY/ON button–power ON/
OFF button
Press to switch the amplifier ON or into
STANDBY mode or to switch OFF.
3 STANDBY indicator
Lights when the amplifier is in STANDBY
mode. (Please note that this amplifier con-
sumes a small amount of power [0.65 W] in the
standby mode.)
4 Remote sensor
Receives the signals from the remote control.
5 Display (See p.36)
6 MCACC indicator (see p.16, step 13)
Lights when the ACOUSTIC CAL EQ is on.
(After the Auto Surround Sound Setup has
been completed the ACOUSTIC CAL EQ is set
on and this display will light.)
7 INPUT indicators
Shows which source component is selected.
The MULTI CH INPUT indicator lights when a
component connected to MULTI CH INPUT is
selected.
8 LISTENING MODE SELECTOR dial
Turn and push to select a listening mode.
9 MASTER VOLUME dial
Adjusts the overall amplifier volume.
10 ACOUSTIC CAL. button (see p.53)
Use to switch on and off the Acoustic Calibra-
tion EQ.
11 MIDNIGHT button (see p.54)
Use to switch the amplifier into MIDNIGHT
mode.
12 LOUDNESS button (See p.54)
Switches the LOUDNESS mode on or off (for all
modes except THX).
STANDBY/ON
OFF ON
STANDBY
DVD/LD TV/DVD SAT VIDEO
VIDEO AUDIO
VCR1/DVR VCR2 VCR3 CD TUNER PHONO CD-R/ TAPE1/MD MULTI CH INPUT
INPUT SELECTOR
LISTENING MODE SELECTOR
PUSH ENTER
MASTER VOLUME
VSA-AX10 AUDIO VIDEO MULTI-CHANNEL AMPLIFIER
0 - =
+ % ^ & * ( _ )
~ # ! @ $
1 2 3 5 4 7 6 8 9