Placing your speakers, Speaker placement, Prep ara tion prep ara tion – Pioneer VSA-AX10 User Manual

Page 27

Advertising
background image

PREP

ARA

TION

PREP

ARA

TION

Connecting Your Equipment

27

En

Placing Your Speakers

Proper speaker placement is essential to realize the best sound from your system. The diagram and tips
given here are just a rough guide, for more information see page 95. Also, it is very important for speaker
placement to read the instructions that come with your speakers so please be sure to do so.

Speaker placement

If you have a multiple speaker arrangement the placement of the speakers is extremely important. To
achieve the best possible surround sound, install your speakers as shown below. Make sure all speakers
are installed securely to prevent accidents and improve sound quality. Be sure to consult p.95 and your
speaker manuals for the best placement of the speakers. Some speakers are designed to be floor-
standing but others benefit greatly from speaker stands which raise them off the floor.

memo

• When installing speakers near the

TV, we recommend using
magnetically shielded speakers to
prevent possible interference such
as distortion in the color of the TV
screen. If you do not have
magnetically shielded speakers
and notice discoloration of the TV
screen, place the speakers farther
away from the TV.

• Install the center speaker above or

below the TV so that the sound of
the center channel is localized at
the TV screen.

• See page 95 for more detailed

advice on speaker placement.

• If you have two surround back

speakers we recommend placing
them together and the same
distance from your listening
position so you can take
advantage of the ASA feature. For
more details see pages 94-96.

Front Speaker

(L)

Surround

Speaker (L)

Surround Back

Speaker (L)

Surround Back

Speaker (R)

Surround

Speaker (R)

Front Speaker

(R)

Powered

Subwoofer

Center Speaker

CAUTION:

When installing the center speaker on top of the TV be sure to secure it with suitable means.

7 Speaker terminals

1 Twist exposed wire

strands together.

2 Loosen speaker terminal

and insert exposed wire.

3 Tighten

terminal.

10mm

Advertising