Porsche 944 - Manual (Page 15)

944 Maintenance, Self-diagnosis
03
Connection in the 944 S
In the 944 S, the diagnosis socket is
attached
to a separate cable harness located above
the
DME control unit.
87/1012
Ignition off
After connecting the tester, the following dis-
play must appear.
Display:
If this is not the case, check the tester ter-
minals or check the power supply of the
diag-
nosis socket in the car by referring to the cir-
cuit diagram.
Diagnosis socket in the car
Pin 1 = terminal 15
Pin 2 = terminal 31
Pin 5 = terminal 30
Pin 9 = Hall generator
87/908
Connection in the 944 S
Printed in Germany - XVI, 1987
03 - 3