Porsche 944 - Manual (Page 80)

15
Engine/Cylinder Head, Valves 944
15. Relieve tension of camshaft
toothed belt by slackening nut
A and bolt B, pressing
toothed-belt tensioner against
the pressure of the spring with
Special Tool 9200 and removing
toothed belt from camshaft
sprocket.
16. Remove distributor rotor. Insert
3 temporary retaining bolts
M 5 x 20 to hold camshaft
sprocket to avoid upsetting
basic camshaft setting when
camshaft central bolt is
slackened.
17. Slacken central bolt while
countering. Remove camshaft
sprocket.
18. Remove rear bracket.
19. Unbolt and remove chain
tensioner.
Note:
Chain-tensioner plunger is spring
loaded. When removing. compress
plunger and after removal hold in
this position with a piece of wire
or a retaining clamp.
15 - 108 Removing and Installing
Camshafts and Cylinder Head
Printed in Germany