Porsche 944 - Manual (Page 87)

944 Engine/Cylinder Head, Valves
15
REMOVING AND INSTALLING CHAIN
TENSIONER
Removing
Remove hollow screws from cylinder
head and chain tensioner and
remove complete with oil line and
seals.
Note:
Chain-tensioner plunger is
spring-loaded. When removing,
compress plunger and hold in this
position with suitable retainer
(improvised tool).
Installing
1. Chain tensioner can be installed
without removal of retaining
clamp.
2. The retaining clamp for the
chain-tensioner plunger must be
removed once the chain tensioner
is installed.
3. When installing the oil delivery
line, install a sealing ring at
both ends of the two hollow
bolts. The check valve is in the
chain tensioner housing.
Tightening torque of hollow
bolts: 10 Nm (7 ftlb)
Printed in Germany - XIII, 1987 Removing and Installing
Chain Tensioner
15 - 113