NEC SIGMABLADE N8406-020 - Manual (Page 123)

- 123 -
5. After the settings of fabric parameters are changed completely, type "n" or press [Enter] for any
message following "Insistent Domain ID Mode" asking whether setting is done or not.
Insistent Domain ID Mode (yes, y, no, n): [no]
Virtual Channel parameters (yes, y, no, n): [no]
F-Port login parameters (yes, y, no, n): [no]
Zoning Operation parameters (yes, y, no, n): [no]
RSCN Transmission Mode (yes, y, no, n): [no]
Arbitrated Loop parameters (yes, y, no, n): [no]
System services (yes, y, no, n): [no]
Portlog events enable (yes, y, no, n): [no]
ssl attributes (yes, y, no, n): [no]
http attributes (yes, y, no, n): [no]
snmp attributes (yes, y, no, n): [no]
rpcd attributes (yes, y, no, n): [no]
cfgload attributes (yes, y, no, n): [no]
webtools attributes (yes, y, no, n): [no] WARNING: The domain ID will ·······
HW060000955:admin>
6. To make the features of the FC Switch Module effective, type "switchenable".
HW060000955:admin> switchenable