Deleting time server setting – NEC SIGMABLADE N8406-020 User Manual
Page 143
- 143 -
Deleting Time Server Setting
1.
Type "tsclockserver" on the console screen.
Any commands used on the switch console should be specified with
lowercase letters.
2.
Check the setting of the current time server.
<Checking time server setting>
HW060000951:admin> tsclockserver
192.168.1.1
HW060000951:admin>
The IP address of the time server being set appears.
3.
Type "tsclockserver LOCL" on the console screen.
"LOCL" should be uppercase letters.
<Change of setting>
HW060000951:admin> tsclockserver LOCL
Updating Clock Server configuration...done.
HW060000951:admin>
4.
Type "tsclockserver" on the console screen to confirm that "LOCL" appears.
<Change of setting>
HW060000955:admin> tsclockserver
LOCL
HW060000955:admin>
If the time server setting is deleted, "LOCL" appears.