NEC SIGMABLADE N8406-020 - Manual (Page 45)

- 45 -
4. Setup Procedure of FC Switch Module
The setup procedure of the FC Switch Module is described below.
Explained in this
User's Guide
Installing FC Switch Module See Page 46.
Installing SFP Module See Page 51.
Install FC switch module in Blade Enclosure.
Install SFP modules in FC switch module.
Setting Up FC Switch Module See Page 53.
Provide several settings for the FC Switch Modules.
Connecting Peripherals See Page 54.
Connect peripherals to the external ports on the FC Switch
Modules.
„ If FC Switch Modules are subjected to cascade connection, perform the
procedure described in "Appendix Cascade Connection" before connecting
peripherals to the FC Switch Modules.