NEC SIGMABLADE N8406-020 - Manual (Page 145)

- 145 -
Saving Setting
1. Confirm that the FC Switch Module is connected to the proper network.
„ To save the setting information, various settings in the FC Switch Module
must be stored in a text file to be transmitted to the FPT server. Accordingly,
the FC Switch Module must be connected to the network.
2. Confirm that the FTP server is accessible.
„ To save the information set on the FC Switch Module, transmit the text file
containing the setting information to the FTP server.
3. Login to the console on the FC Switch Module.
4. Type "configupload" on the console screen.
WH040000556:admin> configupload
Protocol (scp or ftp) [ftp]:
Server Name or IP Address [host]: 192.168.1.90
User Name [user]: switch
File Name [config.txt]:
Password:
Upload complete
WH040000556:admin>
„ For the IP address, user ID and password of the FTP server to which the
setting file is transmitted, contact the administrator of the FTP server you
use.
„ Setting file "config.txt" is transmitted to the home directory of the FTP server.
„ To change the name of the setting file, enter the new file name in the File
Name field.
5. Confirm that the text file of the name "config.txt" or specified by the configupload command is
transmitted to the home directory of the FTP server.