NEC SIGMABLADE N8406-020 - Manual (Page 52)

- 52 -
Removal Procedure
Pull down the lever on the SFP module.
Hold the lever and pull out the module in the arrow direction shown in the figure.
„ Before the SFP module can be removed, the lever should always be
lowered. If the SFP module is pulled out without the lever lowered, the SFP
module and/or slot may be damaged.
N8406-*** FC Switch Module
NF9330-SF02 SFP module
Pull down
the lever
N8406-*** FC Switch Module
Pull-out
direction