For proper operation – NEC SIGMABLADE N8406-020 User Manual
Page 13
![background image](/manuals/192907/13/background.png)
- 13 -
Notes on Use
- For Proper Operation -
Note the following when you use the product. If you ignore the notes, your assets (including important
data and/or other devices) may be damaged.
The product is extremely sensitive to static electricity. Make sure to touch the metal frame of the
Blade Enclosure (SIGMABLADE) to discharge static electricity from your body before handling the
product. Do not touch the terminals or component of the product by a bare hand and place the
product directly on the desk.
Do not drop the product. Do not make the product hit against other objects. Failure to follow these
instructions may cause the product to operate incorrectly or to be damaged.
Read carefully this Guide and the User's Guide of the Blade Enclosure (SIGMABLADE) to use the
product correctly.
If the product cannot be installed in switch module slot of the Blade Enclosure (SIGMABLADE)
securely, remove the product once and then install it again. Adding excess force to the product may
cause the product to be damaged.