Ratoc Systems CBFW3 - Manual (Page 15)

Windows 98SE
11
Step3.Installing MSDV.SYS update program
Install MSDV update program(252640USA8.EXE) when you use Windows 98 SE.
Follow the steps to install MSDV update program.
1.Set the CBFW3 CD-ROM into your CD-ROM drive.
2.Open [My Computer] and double-click CD-ROM drive icon.
3.Double-click [Win98SE] folder and double-click the [DvPatch] folder.
4.Double-click on [252640USA8.EXE] file to install it.
Step2.Verify the OHCI driver installation
To verify the OHCI driver installation,follow the steps.
1.Click My Computer with the right button of the mouse.
2.Select Properties.
3.Click the Device Manager tab.
4.Double-click “1394 Bus Controller”.
5.If there is a Texas Instruments OHCI Compliant IEEE 1394 Host Controller string
without any yellow “!” marks or red “X” marks under the 1394 Bus Controller,
the OHCI driver for the CBFW3 is installed correctly.
Check here