Ratoc Systems CBFW3 - Manual (Page 26)

Windows 98SE
Windows Me
22
2-4-1.Windows 98SE/Windows Me CCD Camera Setup
When the CCD camera is connected,the CCD camera will be recognized automatically.
To verify the CCD driver installation, follow the steps.
1.Click My Computer with the right button of the mouse.
2.Select Properties.
3.Click the Device Manager tab.
4.Double-click “Imaging Device”.
5.If there is a CCD camera name string without any yellow “!” marks or red “X” marks under the
[Imaging Device] as shown below, the driver is installed correctly on Windows 98SE.
If there is a CCD camera name string without any yellow “!” marks or red “X” marks under the
[Imaging Device] as shown below, the driver is installed correctly on Windows Me.
OS:Windows 98SE OS:Windows Me