Ratoc Systems CBFW3 - Manual (Page 41)

37
Category Item Description
DVCAM Settings Check DVCAM Mode
If you click here, this application will detect
whether your DVCAM is in camera mode
or video mode automatically. If your
DVCAM is in video mode, the Camera
Control Bar will disappear. If your DVCAM
is in camera mode, the Camera Control Bar
will appear and the Video Control Bar will
be disabled.
Enable Step Control
By Mouse Wheel
If you check here, you can control a
camera with your mouse as shown below.
1)When you click wheel,
a DVCAM starts to play.
2)When you turn wheel down,
a DVCAM starts to rewind.
3)When you turn wheel up,
a DVCAM starts to fast forward.
4)When you click the right button,
a DVCAM stops.