3. features, 4. system requirements – Ratoc Systems CBFW3 User Manual
Page 6
2
1-3. Features
• Two external IEEE1394 ports are available at card.
• IEEE-1394.a compatible PHY chip is on card.
• Full backward compatibility to IEEE1394-1955 device.
• OHCI 1.0 fully compliant Link chip is on card.
• 100, 200 and 400Mbps data rate is automatically supported at each IEEE1394 port.
• Class 1(15W) cable power is available at IEEE1394 port with additional cable power adapter.
• Fully compliant with PC Card Standard 7.0.
• 32-bit Bus-mastering data transfer and 33MHz operation.
1-4. System Requirements
•Windows users
OS: Windows98 SE(Second Edition), Windows 2000, Windows Me(Millennium Edition)
System: Pentium II 300MHz or above and Memory 64 MB or above are recommended for the
video editing.
*1
High performance DMA enabled Hard Disk Drive is recommended.
*2
*1
If your PC can not meet the specifications above, video motion and audio may get choppy.
*2
It is neccessary to have about 4MB disk space to capture 1 second video. To achieve 13MB/
sec or above Read/Write speed of a HDD, you should use a 7,200rpm and Ultra DMA
enabled HDD.
•Macintosh users
MacOS 9.0.4 or later
Apple PowerBook G3 233, 250, 266, 292, 300, 333
, 400
*
If your PowerBook G3 is not 333 or 400, frame dropping may happen when you capture
a video from a DVCAM directly to a FireWire HDD. So, when you want to capture a video
from a DVCAM directly to a FireWire HDD, PowerBook G3 333 or 400 is recommended.