Ratoc Systems CBFW3 - Manual (Page 77)

73
3.How to install the driver:CBPRSET.SYS
You have already installed the driver [Texas Instruments OHCI Compliant IEEE 1394
Host Controller].
You should replace it to the new “RATOC 1394 CardBus Card(TI OS Version)” driver.
You can update and replace it, simply following the instructions below.
1.Insert the CBFW3 PC Card into the PC Card slot.
2.Click My Computer with the right button of the mouse.
3.Celect Properties.
4.Click the Hardware tab.
5.Click the Device Manager button. You will see the screen below.
6.Double-click “IEEE1394 Bus host controllers” icon.
You can find a [Texas Instruments OHCI Compliant IEEE 1394 Host Controller] string
as shown below and select and double-click it.