Ratoc Systems CBFW3 - Manual (Page 22)

Windows 98SE
Windows Me
18
2-3-1.Windows 98 SE/Windows Me DV Driver Setup
Verify the DV driver installation
When you connect a DVCAM on Windows 98 SE or Windows Me, the DV driver will be installed
automatically. To verify the DV driver installation, follow the steps.
1.Click My Computer with the right button of the mouse.
2.Select Properties.
3.Click the Device Manager tab.
4.If there is a “Microsoft DV Camera and VCR” string without any yellow “!” marks
or red “X” marks under the [Imaging Device] as shown below, the DV driver is installed
correctly on Windows 98SE.
If there is a camera name string without any yellow “!” marks or red “X” marks under the
[Imaging Device] as shown below, the DV driver is installed correctly on Windows Me.
OS:Windows 98SE OS:Windows Me