Ratoc Systems CBFW3 User Manual
Page 42
38
C
Category Item Description
When you control a DVCAM from the PC
consecutively, it takes some time for the
DVCAM to get ready for a next command
from the PC. This time depends on the
DVCAM. If you have trouble in controlling
the DVCAM from the PC consecutively,
change this value to a longer time than 4
seconds. Default time is 4 seconds. For
example, 5 seconds.
DVCAM Command
Response time
DV Export prefix time
When you export an AVI file to a DVCAM,
there is data prefix time from starting to ex-
port the AVI file to recording it onto a DV
tape. The data prefix time results in failing to
record the beginning of the AVI file onto the
DV tape. To avoid this problem, you can set
a time here. During the time you set here, blank
data will be exported to the DVCAM and it
avoids failing to record the beginning of the
AVI file onto the DV tape.