Ratoc Systems CB31U - Manual (Page 12)

W
indows95
10
2. Setup
2-2-1. Installing the CB31U on Windows 98
1. Check to see if your PCMCIA Controller supports CardBus PC Cards.
a. Click My Computer with the right button.
b. Select Properties. You will see the System Properties window below.
c. Click the Device Manager tab.
d. Double-click on the PCMCIA socket string and make sure there is a CardBus controller name
string without “!” or “X” marks.
NOTE
If a CardBus controller name string does not appear, or if it appears with a “!” or “X” mark next
to it, enable the CardBus controller with PC Card (PCMCIA) Wizard. For more information,
please contact your PC manufacturer.
2-2. Windows 98 Setup
Here’s how to get started with the CB31U and SCSI devices on Windows 98:
1. Check the restrictions before you install the CB31U.
2. Install the CB31U into the PC. Refer to Chapter 2-2-1.
3. Confirm the installation. Refer to Chapter 2-2-2.
4. Remove the CB31U from the PC. Refer to Chapter 2-2-3.
5. Connect the CB31U to the PC. Refer to Chapter 3-1.
6. Confirm the SCSI connection. Refer to Chapter 3-2.