Ratoc Systems CB31U - Manual (Page 52)

50
3. Using SCSI devices
3-2. Confirming SCSI device Connection
1. Open Device Manager.
2. Make sure the SCSI device name string appears in the Device Manager.
The following Device Manager in Windows 2000 shows Iomega Zip drive is connected to the CB31U.
3. Double-click the SCSI device name string. The device properties window will appear.
4. If you can find The device is working properly under the Device status, the SCSI device is
working fine. The following SCSI device properties window in Windows 2000 also shows SCSI ID No.
Target ID xx means SCSI ID No.
If you have connected a HDD, CD-ROM, Removable Disk such as Jaz, Zip drive, you can also find the
icon in My Computer.
NOTE
Never remove the CB31U while the ACCESS LED of the SCSI device is lighting on.