Ratoc Systems CB31U - Manual (Page 55)

53
4. SCSI Format Utility
8. a. If you have selected IBM-PC/AT FDISK Format at the step 7.,
the message box saying [You should create partition next] appears. Click OK. You will see the
screen shown at the step 6. and select [Create partition] from the [Edit] menu to create partition.
You will see the screen below. Select [File System] from the list box and set Partition size, using the
slider bar. Then, click OK.
b. If you have selected Super FD Format at the step 7., you will see a screen similar to the following.
Select [File System] from the list box.
Slider bar
NOTE:
If you select FAT32 in [File System], MS-DOS/Windows 3.1, Windows NT can not access to the
for FAT32 media.
9. To take efect, restart your computer or take the CB31U out and into the slot.