3. if your laptop is made by toshiba, 4. if you use fujitsu mo(m2512a, m2513a) – Ratoc Systems CB31U User Manual
Page 89
87
8. Troubleshooting
8-3. If your laptop is made by TOSHIBA
I can use 16-bit PC Card with my laptop made by TOSHIBA, but I can not get a CardBus PC Card
up and running.
1. Shut down your laptop.
2. Start your computer.
3. Press the ESC key at boot time.
4. When Check system. Then press [F1] key is displayed, press the F1 key.
5. When BIOS-SystemSetup(1/2) is displayed, select CardBus/16-bit under PC Card Controller Mode.
6. Press the End key to restart your system.
8-4. If you use FUJITSU MO(M2512A, M2513A)
System locks up when I connect old model MO of which drive engine is M2512A, M2513A
You need to install our SCSI configuration utility and change transfer rate with it.
If you are using Windows 95/98/Me, refer to Chapter 9-4-1 and set transfer rate to 10MB/sec.
If you are using Windows 2000, refer to Chapter 9-4-2 and set transfer rate to 10MB/sec.