Ratoc Systems CB31U - Manual (Page 38)

W
indowsXp
2. Setup
36
2-5. Windows Xp Setup
Here’s how to get started with the CB31U and SCSI devices on Windows Xp:
1. Check the restrictions before you install the CB31U.
2. Install the CB31U into the PC. Refer to Chapter 2-5-1.
3. Confirm the installation. Refer to Chapter 2-5-2.
4. Remove the CB31U from the PC. Refer to Chapter 2-5-3.
5. Connect the CB31U to the PC. Refer to Chapter 3-1.
6. Confirm the SCSI connection. Refer to Chapter 3-2.
2-5-1. Installing the CB31U on Windows Xp
1. Check to see if your PCMCIA Controller supports CardBus PC Cards.
a. Click My Computer with the right button.
b. Select Properties. You will see the System Properties window below.
c. Click the Hardware tab.