Aspcb3x.sys parameter – Ratoc Systems CB31U User Manual
Page 61
MS-DOS
59
5. How to install Windows 95/98
--------------------------- ASPCB3x.SYS parameter ------------------------------
Format:
DEVICE = <directory path>: \ ASPCB3x.SYS [/L] [/P] [/V]
Parameter
[/L]
LUN(Logical Unit No). When you set this parameter, All LUN will be searched. If you don’t set anything to
this parameter, only LUN=0 will be searched. When you use PD drives, CD-ROM Changers, set this /L
parameter.
[/P]
Pause. When you set this /P parameter, pause the screen and you can check the result of the execution.
[/V]
View. When you set this /V parameter, the CB31U displays information including IO port address,
IRQ,and the SCSI device connected to the CB31U as shown below.
Card Bus Enabler Vx.xx
IRQ = 0A IO BASEAddress =1000 MEMORY BASE Address = CC00
Enable Success
REX Universal ASPI Manager x.xx
ASPI HOST Adapter#0 I/O Port 1000h IRQ 10 SCSI ID 7
SCSI ID #4 TYPE 5: MATSUSHITA PD-2 LF-D100 A106