1. windows 95 setup, 1-1. installing the cb31u on windows 95 – Ratoc Systems CB31U User Manual

Page 5

Advertising
background image

W

indows95

3

2. Setup

2-1. Windows 95 Setup

Here’s how to get started with the CB31U and SCSI devices on Windows 95:

1. Check the restrictions before you install the CB31U.

2. Install the CB31U into the PC. Refer to Chapter 2-1-1.

3. Confirm the installation. Refer to Chapter 2-1-2.

4. Remove the CB31U from the PC. Refer to Chapter 2-1-3.

5. Connect the CB31U to the PC. Refer to Chapter 3-1.

6. Confirm the SCSI connection. Refer to Chapter 3-2.

2-1-1. Installing the CB31U on Windows 95

1. Check your Version of Windows 95.

a. Click My Computer with the right button.

b. Select Properties. You will see the System Properties window below.

c. Click the General tab.

d. If you can find 4.00.950 B or 4.00.950 C, you can use the CB31U.

NOTE

If the version of your Windows 95 is 4.00.950 or 4.00.950 A, you can not use the CB31U.

Advertising