Ratoc Systems CB31U - Manual (Page 77)

75
8. Troubleshooting
3. Remove the registry.
a. Select Run on the start menu.
b. Type REGEDIT in the Open box.
c. Click HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlset, Services and REXCB3x.
d. If SYSTEM32\DRIVERS\REXCB3x.SYS appears at ImagePath line, select the key and press
the Delete key.
e. If no SYSTEM32\DRIVERS\REXCB3x.SYS is listed under ImagePath line, finish the
registry editor.
4. You have now deleted the CB31U driver completely. You can now re-install the CB31U.