Roland XV-5080. - Manual (Page 198)

198
Chapter 8 Saving Tones and Other Data You’ve Created
By pressing [F2 (View)], you can specify the category of files
to be displayed.
Turn the VALUE dial or press [ ] or [ ] to select the
category to be loaded, then press [F5 (Mark)]. Press [F4 (Mk
All) if you want to set markers for all files. Press this once
more to remove all markers.
The files can also be sorted. Press [F3 (Sort)] to open the
window for selecting the sorting preferences. Turn the
VALUE dial or press [ ] or [ ] to select the sort type,
then press [F6 (OK)].
Without: Files are displayed in the order in which they have
been saved.
Name: Files are sorted by file name, in ascending order.
Size : Files are sorted in ascending order of file size.
Size : Files are sorted in descending order of file size.
8. Press [F6 (Delete)].
The confirmation message “Delete Sure?” appears in the
display.
9. When you press [F6 (OK)], the delete is executed.
* To cancel the operation, press [EXIT].
* You cannot delete individual Patches or Performances within
a file (.SVD).
Free Area
SIMM
This displays the amount of free space in the SIMM.
Disk
This displays the free disk space remaining on the connected
SCSI device.
Marked
This displays the number and size of marked samples being
transmitted.
<Copying/Moving Files (Cp/Move)>
1. Press [DISK], lighting the indicator.
2. Press [F1 (Crd&Dsk)].
3. Press [F5 (Tool)].
The Card&Disk Copy Source page appears.
4. Press [F1 (Drive)].
5. Rotate the VALUE dial, or press [ ]/[ ] to select
“CARD.”
6. Press [F6 (OK)].
7. Turn the VALUE dial or press [ ] or [ ] to select the
files to be copied or moved, then press [F5 (Mark)]. Press
[F4 (Mk All) if you want to set markers for all files. Press
this once more to remove all markers.
By pressing [F2 (View)], you can specify the category of files
to be displayed.
Turn the VALUE dial or press [ ] or [ ] to select the
category to be loaded, then press [F5 (Mark)].Press [F4 (Mk
All) if you want to set markers for all files. Press this once
more to remove all markers.
The files can also be sorted.Press [F3 (Sort)] to open the
window for selecting the sorting preferences. Turn the
VALUE dial or press [ ] or [ ] to select the sort type,
then press [F6 (OK)].
Without: Files are displayed in the order in which they have
been saved.
Name: Files are sorted by file name, in ascending order.
Size : Files are sorted in ascending order of file size.
Size : Files are sorted in descending order of file size.
8. Press [F6 (Select)].
The Card&Disk Copy Destination page appears.
* The amount of space available on the media at the copy/move
destination is displayed. This allows you to check whether or
not marked files can be copied/moved.
9. After pressing [F1 (Drive)], turn the VALUE dial or press
[ ] or [ ] to select the media you want to be the
copy/move destination.
When copying or moving to a folder, press [ ] or [ ] to
select the move destination folder, then press [ ] to close
the folder.
10. Press [F6 (OK)].
11. Press [F6 (Copy)] to initiate the copy.
Here, when you press [F5 (Move)], the move is executed.
* To cancel the operation, press [EXIT].
* You cannot copy or move individual Patches or Performances
within a file (.SVD).