Roland XV-5080. - Manual (Page 246)

246
Parameter List
■ Multi Partial Patch Parameters
PATCH Common Split ([PATCH]-[F1(Common)]-[F3(Split)])(p. 148)
Group Parameter Value
Note --- Note Number A0–C8
No. --- Partial Number ---
Partial Name --- Partial Name ---
L.P --- Lower Key Point A0–C8
U.P --- Upper Key Point A0–C8
Mute --- Mute Group OFF, 1–31
Assign --- Assign Type Mute, Single
MIDI --- MIDI Switch OFF, Select, Set
PATCH WG Partial ([PATCH]-[F2(WG)]-[F1(WG Prm)])(p. 149)
Group Parameter Value
Partial Name Partial Name ASCII Character (max 12 Characters)
Course Tune Partial Course Tune -48–+48
Fine Tune Partial Fine Tune -50–+50
PATCH WG SMT #1 ([PATCH]-[F2(WG)]-[F2(SMT)])(p. 150)
Group Parameter Value
No. --- Sample Number ---
Name --- Sample Name ---
Level --- Sample Level 0–127
Pan --- Sample Pan L32–32R, RANDOM, Key+, Key-, LFO+, LFO-, ALT
C.T --- Sample Course Tune -48–+48
F.T --- Sample Fine Tune -50–+50
P.KF --- Pitch Keyfollow -16–+16
PATCH WG SMT #2 ([PATCH]-[F2(WG)]-[F2(SMT)])(p. 151)
Group Parameter Value
SMT Vel Control Switch SMT Velocity Control Switch OFF, ON
L.F --- Velocity Fade width Lower 0–127
L.F --- Velocity Range Lower 1–Upper
L.F --- Velocity Range Upper Lower–127
U.F --- Velocity Fade width Upper 0–127
PATCH WG Sample ([PATCH]-[F2(WG)]-[F3(SMT)]-[F3(Sample)])(p. 151)
Group Parameter Value
Sample Original Key Original Key C-1–G9
Loop Mode Loop Mode FORWARD, ONE SHOT, ALT, REV ONE, REVERSE
Loop Tune Loop Tune -50–50
Start-Fine --- Start Point - Start Point Fine 0-/0–255
Loop Point Start Fine --- Loop Point Start Point - Loop Point StartPoint Fine 0-/0–255
End - Fine --- End Point - End Point Fine 0-/0–255
PATCH TVF Parameter ([PATCH]-[F3(TVF)]-[F1(TVF Prm)])(p. 153)
Group Parameter Value
TVF Filter type Filter type OFF, LPF, BPF, HPF
Cutoff freq Cutoff frequency 0–127
Resonance Resonance 0–127
Cutoff Keyfollow Point Cutoff frequency keyfollow Point A0–C8
Keyfollow Cutoff frequency keyfollow -63–+63
TVF Velo Curve TVF cutoff velocity curve 1–4
Sens Resonance Velocity Sens 0–127