Roland XV-5080. - Manual (Page 86)

86
Chapter 2 Using the XV-5080 Effects
EQ Gain
Low (Low Gain)
Adjusts the gain of the low frequency range.
Positive (+) settings will emphasize (boost) the low-
frequency range.
High (High Gain)
Adjusts the gain of the high frequency range.
Positive (+) settings will emphasize (boost) the high-
frequency range.
Output
Level (Output Level) #
Adjusts the output level.
72: ROTARY MULTI
This connects Overdrive/Distortion (ODDS), 3-band
equalizer (EQ), and Rotary (RT) effects in series.
fig.02-072m.e
Sequence
OD/Dist (Overdrive/Distortion Switch)
Turns the Overdrive or Distortion on/off.
Amp Sim (Amp Simulator Switch)
Turns the Amp Simulator on/off.
3 Band EQ (3 Band EQ Switch)
Turns the 3 Band EQ on/off.
Rotary (Rotary Switch)
Turns the Rotary on/off.
Overdrive/Distortion
Type
Selects whether to use Overdrive or Distortion.
Drive #
Adjusts the degree of distortion. The volume will change
together with the degree of distortion.
Tone
Adjusts the sound quality of the Overdrive/Distortion effect.
Level
Adjusts the Overdrive/Distortion output level.
Amp Simulator
Type (Amp Type)
Selects the type of guitar amp.
EQ Gain
Low (EQ Low Gain)
Adjusts the low-range gain of the equalizer.
Mid (EQ Mid Gain)
Adjusts the gain of the area specified by the EQ M Fq
parameter and the EQ M Q parameter.
High (EQ High Gain)
Adjusts the high-range gain of the equalizer.
Mid
Mid Freq (EQ Mid Frequency)
Sets the center frequency for the equalizer mid-range.
Mid Q (EQ Mid Q)
Adjusts the width of the area centered at the EQ M Fq setting
in which the gain will be affected. Higher values of Q will
result in a narrower area being affected.
Rotary
Speed #
Simultaneously switch the rotational speed of both the low-
range and the high-range rotors.
Slow: Slow down the rotation to the specified speeds (RT L
Slow parameter/RT H Slow parameter values).
Fast: Speed up the rotation to the specified speeds (RT L Fast
parameter/RT H Fast parameter values).
Separation
Adjusts the spatial spread of the rotary sound.
Woofer
Slow (Low Frequency Slow Rate)
Adjusts the speed of the low-range rotor for the slow-speed
setting.
L out
Pan
R out
L in
R in
Overdrive/
Distortion
Rotary
3-Band EQ
Amp
Simulator