Guitar multi c(p. 98) – Roland XV-5080. User Manual

Page 98

Advertising
background image

98

Chapter 2 Using the XV-5080 Effects

Cutoff (Cutoff Frequency)

Sets the cutoff frequency when a specific frequency band is
cut off by a filter.

Output

Level (Output Level)

Adjusts the output level.

Pan (Output Pan)

Adjusts the stereo location of the output sound.

83: GUITAR MULTI C

Guitar Multi C connects Overdrive or Distortion (ODDS),
Wah (Wah), Amp Simulator (Amp), Delay (Dly), and Chorus
or Flanger (CF) effects in series.

fig.02-083m.e

Sequence

Wah Sw (Wah Switch)

Turns the wah on/off.

Amp Sim (Amp Simulator Switch)

Turns the Amp Simulator on/off.

Wah (Wah Switch)

Turns the wah on/off.

Delay (Delay Switch)

Turns the Delay on/off.

Cho/Flg (Chorus/Flanger Switch)

Turns the wah on/off.

Overdrive/Distortion

Type

Selects either Overdrive or Distortion.

Drive #

Adjusts the degree of distortion. The volume will change
together with the degree of distortion.

Tone

Adjusts the sound quality of the Overdrive/Distortion effect.

Level

Adjusts the Overdrive (or Distortion) output level.

Wah

Filter Type (Wah FIlter Type)

Selects the filter type.

LPF: The wah effect will be applied over a wide frequency
range.

BPF: The wah effect will be applied over a narrow frequency
range.

Rate

Adjusts the frequency of the modulation.

Depth

Adjusts the depth of the modulation.

Sens

Specifies the sensitivity with which the filter will be affected.

Manual #

Sets the center frequency from which the effect is applied.

Peak

Adjusts the amount of the wah effect that will occur in the
area of the center frequency. Lower settings will produce a
wah effect in a broad area around the center frequency, and
higher settings will produce a wah effect in a narrower area
around the center frequency.

Amp Simulator

Type (Amp Simulator Type)

Selects the type of guitar amp.

Small:

small amp

BltIn:

built-in type amp

2-Stk:

large double stack amp

3-Stk:

large triple stack amp

Delay

Left Time (Delay Time Left)

Adjust the delay time from the original sound until the left
delay sound is heard.

Right Time (Delay Time Right)

Adjust the delay time from the direct sound until the right
delay sound is heard.

L out

R out

L in

R in

Overdrive/

Distortion

Amp

Simulator

Delay

Chorus/

Flanger

Pan

Wah

Advertising